Galil运动控制卡集成驱动器

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: Galil运动控制卡集成驱动器

产品型号: DMC-2143-DC24+AMP20540

产品展商: 美国Galil

会员价格: 0.00 元

产品文档: 无相关文档

简单介绍

Galil运动控制卡集成驱动器，Galil DMC-2143-DC24可选端子板、驱动器等附件介绍。

Galil运动控制卡集成驱动器 的详细介绍

Galil运动控制卡集成驱动器详细说明

AMP20540

AMP-205x0 2- and 4-axis 500W Servo Drives：
The AMP-20540 contains four transconductance, PWM amplifiers for driving brushless or brush-type servo motors.Each amplifier drives motors operating at up to 7 Amps continuous, 10 Amps peak,18–60 VDC (available voltage at the motor is 10% less). The gain settings of the amplifier are user-programmable at 0.4 Amp/Volt, 0.7 Amp/Volt and 1 Amp/Volt.The switching frequency is 60 kHz.The
amplifier offers protection for over-voltage,under-voltage, over-current, short-circuit and over-temperature.Theamplifier status can be read through the DMC-21x3 controller, and the BS command allows easy hall sensor set-up.A 2-axis amplifier board

the AMP-20520 is also available. In a standard configuration the
DB-28040 I/O board will not install next to an AMP-20540, however the
AMP-20540 provides 8 uncommitted analog inputs with 12-bit ADC
(16-bit optional)

DMC-2143-DC24+AMP20440

Galil DMC-2143-DC24四轴运动控制卡可选的附件规格

端子板	ICM-20100	Provides D-sub connectors for cost-effective connection to external drives
	ICM-20105	Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs
	ICM-20105T	Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs

驱动器	AMP-20420	Contains two 200W PWM drives for driving brush-type servo motors
	AMP-20440	Contains four 200W PWM drives for driving brush-type servo motors.
	AMP-20341	Contains four small 20W linear drives for driving small brush-type servo motors
	AMP-20520	Contains two 500W PWM drives for driving brushless or brush-type servo motors
	AMP-20540	Contains four 500W PWM drives for driving brushless or brush-type servo motors
	AMP-20542	Contains four PWM drives for driving brushless or brush-type servo motors(3Amps Continuous, 5Amps peak at 18-60VDC). Software selectable for low inductance motors .
	SDM-20240	Contains four small drives for stepper motors operating in full/half step mode
	SDM-20620	Contains two drives for stepper motors operating in microstepping mode
	SDM-20640	Contains four drives for stepper motors operating in microstepping mode

附件	DB-28040	Provides 40 additional digital I/O and eight analog inputs
附件	DB-28104	Provides sinusoidal interpolation for Sin/Cos encoders

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!